Install Guide For AirOxi Efficient Aeration Systems For Aquaculture

Worried about the installation process of the AirOxi efficient aeration systems for aquaculture?

You need not worry at all since here we are to help you with a simple installation guide so that you can conveniently do everything by yourself without anyone’s help. At the beginning you should know about the parts of the aeration systems which would be quite helpful in the overall process of installation. The main parts are as follows.

Motor
Root Blower
Pressure Gauge
Filter (Fabric/Paper)
Starter and Auto Timer (This is optional)
Ampere Meter
Flanges

A proper connection of all the parts are necessary. Now, the metal or plastic receiver needs to be connected appropriately. The next step is to insert grommets into specific positions of the receiver. Then insert take-off and attach 16MM valve or tap. After that the air pipe or lateral pipe needs to be connected with the valve or the tap. The next step of installation is arranging the grid uniformly on all sides of the pond. At this point of time, it is to be made sure that the height of the frame or tube should be necessarily adjusted to a uniform level which concludes the process of installation. Now, the pond is ready for aquaculture with the AirOxi’s efficient aeration systems.